A vehicle recall becomes particularly alarming when the problem involves something as fundamental as keeping the wheels securely attached to a car. Chinese automaker Chery is recalling 53,882 Tiggo 5x and Omoda-series vehicles in China over potentially defective rear-axle welds that could compromise vehicle control and increase the risk of an accident.
Announced on November 6, 2026, the recall follows serious safety concerns in Malaysia, where an Omoda 5 experienced a rear-axle separation while driving. Malaysian authorities subsequently intervened, and Chery launched a separate recall affecting 8,878 vehicles.
The expanding safety response has raised questions about manufacturing quality, supplier oversight, and how quickly potential defects are identified across international markets. For affected owners, the priority is understanding the risk and ensuring their vehicles receive the necessary inspections and repairs.
China’s Recall Covers Vehicles Built Between 2022 and 2023
China’s State Administration for Market Regulation (SAMR) published the formal recall notice on November 6, 2026, identifying 53,882 Chery Tiggo 5x and Omoda-series vehicles manufactured between June 6, 2022, and December 31, 2023. The campaign, registered under recall number S2026M0146V, is scheduled to begin on November 27. The announcement represents a significant safety intervention for two of Chery’s crossover product lines. However, the affected production dates do not mean every Tiggo or Omoda manufactured during that period is being recalled. The notice specifically applies to vehicles identified within the manufacturer’s recall population.
The distinction matters for owners trying to determine whether their vehicles are involved. Someone who purchased a vehicle in 2024, for example, could own a model assembled during the affected manufacturing period. Chery has committed to identifying potentially defective rear axles through production-date information rather than relying on the vehicle’s age alone. The regulator’s notice does not provide a separate breakdown for Tiggo 5x and Omoda vehicles, leaving the precise distribution between the two lines undisclosed. For now, the confirmed total establishes the scale of the safety campaign, while individual vehicle eligibility must be determined through the manufacturer’s official recall process.
A Rear-Axle Welding Problem Could Affect Vehicle Control
The defect involves a welded connection between the rear axle’s trailing arm and its sleeve. According to Chinese regulators, manufacturing-process problems may have resulted in inadequate welding at this location. Under extreme conditions, the joint could fail and separate, potentially affecting control of the rear wheels and increasing the likelihood of a collision. Unlike a defective touchscreen or malfunctioning convenience feature, this problem involves a structural component directly connected to the vehicle’s road handling. The rear axle and associated suspension components help maintain wheel positioning as a vehicle moves, turns, and travels over uneven surfaces.
A failure in that assembly can have consequences beyond an ordinary suspension repair. If a critical connection separates, the rear wheel may no longer remain properly located relative to the vehicle’s body, compromising stability and control. That is particularly concerning because the affected welds are not components drivers can easily evaluate during routine checks or washing. A vehicle could appear completely normal from the outside without revealing whether its axle belongs to a problematic production batch. SAMR describes the failure as a possibility under extreme circumstances, not an event that will happen to every recalled vehicle. Nevertheless, the potential severity explains why Chery must inspect the affected components and replace defective assemblies rather than simply advise owners to monitor their vehicles.
The Recall Does Not Mean All 53,882 Vehicles Have Defective Axles
The headline number is substantial, but it is important to understand what it represents. The 53,882 vehicles are those covered by China’s recall campaign, not a confirmed count of defective rear axles. Chery’s official repair procedure involves checking the production-date codes on the rear axle assemblies. If the information identifies an axle from a defective manufacturing batch, the company will replace the assembly free of charge. This screening process allows the manufacturer to cast a wider safety net without assuming every vehicle within the recall population contains a faulty component.
The final number of replacements could therefore be considerably smaller than the total recall population, although the available notice does not disclose an expected replacement count. It also provides no model-by-model figures showing how many Tiggo 5x vehicles versus Omoda vehicles are included. This leaves important questions about the defect’s distribution unanswered. For a vehicle owner, however, the difference between a potentially defective component and a confirmed defective component should not delay participation in the recall. The purpose of the inspection is to establish which vehicles require corrective action before a dangerous failure occurs. Until the relevant checks are completed, the production history of an individual axle remains more informative than how well the vehicle appears to drive.
An Omoda 5 Incident in Malaysia Brought the Problem Into Focus
The Chinese recall follows a disturbing incident involving a 2023 Chery Omoda 5 in Johor Bahru, Malaysia, on October 6, 2026. The vehicle’s rear axle assembly separated while it was being driven, prompting widespread public concern after images of the damaged SUV circulated online. Chery subsequently confirmed that no personal injuries had been reported. Although that outcome prevented an already serious situation from becoming a human tragedy, the incident highlighted the potential danger of a structural suspension failure. A component that ordinarily operates out of sight had suddenly become the centre of an international vehicle safety investigation.
Chery investigated the Malaysian incident and reported that certain vehicles could have insufficient welding strength in localized areas of their rear-axle trailing arms. Under severe conditions, those welds could tear. The manufacturer also stated that vehicles using the particular structure involved had already ceased production. For existing owners, that distinction offered limited reassurance because vehicles produced earlier could still be on the road. The Malaysian case illustrated why automotive safety concerns do not necessarily disappear when a model is discontinued or redesigned. It also brought renewed attention to the manufacturer’s responsibility to identify potentially affected vehicles wherever they were sold, while leaving open whether the Malaysian failure and the later Chinese recall share an identical manufacturing cause.
Malaysian Authorities Suspended Omoda 5 Vehicle Approvals
Malaysia’s Road Transport Department, known locally as JPJ, responded on October 11 by temporarily suspending the Omoda 5’s Vehicle Type Approval. The decision halted new registrations under the affected approval while authorities investigated the technical problem and assessed potential safety risks. JPJ director-general Aedy Fadly Ramli said the action would target models and variants potentially involved in the defect. The department also required Chery Malaysia to identify vehicles using component numbers, manufacturing batches, vehicle identification numbers, and other relevant information. The intervention went beyond a routine manufacturer announcement by placing regulatory restrictions on the model until safety concerns could be addressed.
JPJ also announced plans for a technical audit covering the Omoda 5’s production and assembly processes and the suppliers responsible for relevant axle components. Investigators were instructed to examine manufacturing practices, quality-control systems, welding inspections, and component safety standards. These measures reflected concern not only about the failed vehicle but also about the processes that allowed a potentially defective component to enter service. The department said the approval suspension would be lifted only after the necessary corrective and preventive measures had been implemented and their effectiveness verified. This created an additional layer of accountability: Chery needed to demonstrate that the problem had been adequately addressed, rather than simply announce that replacement parts would be available.
Malaysia’s Separate Recall Covers 8,878 Omoda 5 Vehicles
Chery’s Malaysian subsidiary confirmed on October 14 that its latest recall campaign covered 8,878 Omoda 5 SUVs, specifically the C and H variants. The campaign focuses on the older, pre-facelift Omoda 5, which has since been replaced in Malaysia by the redesigned Chery O5. Chery Malaysia stated that its current-production models were not affected by the Malaysian recall. The distinction is important because different Chery vehicles may share similar branding without necessarily using identical suspension components. The redesigned O5, for example, uses a multi-link rear suspension rather than the original petrol-powered Omoda 5’s torsion-beam arrangement.
The Malaysian recall is substantially smaller than China’s 53,882-vehicle campaign, although both involve concerns about rear-axle welding. Chery Malaysia said it would proactively contact affected owners and provide complimentary inspections and component replacements through its authorized service network. By October 14, the company had dispatched its first shipment of replacement parts, with deliveries to service centres planned in stages. Owners were also encouraged to check their vehicle identification numbers through the manufacturer’s website. For households relying on these SUVs for daily transportation, the practical challenge is obtaining a reliable inspection and completing any necessary repairs with minimal disruption. The two national campaigns remain separate, and their respective vehicle totals should not be interpreted as confirmed counts of defective axles.
Chery Faced a Similar Rear-Axle Problem in Malaysia in 2024
The latest Malaysian incident is particularly concerning because the Omoda 5 experienced a similar problem more than two years earlier. In April 2024, a reported rear-axle failure prompted Chery Malaysia to organize a precautionary inspection campaign involving 600 vehicles. The company’s investigation identified a manufacturing-equipment problem at a component supplier. According to Chery’s May 4, 2024, explanation, an automated welding machine had received a replacement welding tip during a facility upgrade, but the equipment became improperly calibrated. That calibration problem could compromise the quality of the resulting welds, affecting the rear axle’s structural integrity.
Chery identified 60 Malaysian Omoda 5 vehicles containing affected components produced on August 15, 2023. The company expanded its precautionary campaign to cover 600 vehicles with rear axles produced between August 14 and August 17 of that year. This broader inspection effort was intended to identify potentially affected components before additional failures occurred. The return of rear-axle safety concerns in 2026 naturally raises questions about whether previous corrective measures were sufficient. However, the available findings do not establish that the 2024 defect and the latest incidents share an identical root cause. The earlier campaign involved a specifically identified welding-equipment calibration problem, while the newer investigations concern potentially insufficient weld strength across separately identified vehicle populations.
Chery Began Checking Vehicles in China After the Malaysian Incident
China’s November recall did not emerge in isolation. Following the October 2026 Malaysian incident, Chery announced that it had begun precautionary checks on Omoda 5 vehicles from relevant production batches in China and other markets. The company’s October 11 statement described these inspections as a proactive safety measure undertaken while communicating with regulatory authorities. Less than four weeks later, China’s market regulator published the formal 53,882-vehicle recall covering both Omoda-series vehicles and the Tiggo 5x. The addition of the Tiggo model broadened the scope of the domestic campaign beyond the Omoda 5 vehicles highlighted in Malaysia.
The sequence demonstrates how an incident reported in one country can trigger broader scrutiny of vehicles manufactured or sold elsewhere. Manufacturers operating internationally may need to investigate whether components, production processes, or supplier practices create similar risks across different models. However, the Chinese regulatory notice does not formally establish that its recalled vehicles contain components from the same defective batches involved in Malaysia. It also does not publicly identify the axle supplier or manufacturing facilities associated with the Chinese recall. Those missing details matter because similar symptoms do not automatically prove an identical manufacturing failure. Chery’s expanded response may help reduce further risk, but a complete understanding of the problem requires more detailed evidence about the affected components and how they entered the supply chain.
Owners Have Different Recall Procedures Depending on Their Market
For Chery owners in China, the official recall campaign begins on November 27, 2026. The manufacturer will notify affected customers through text messages and registered letters. Owners can also contact authorized Chery repair stations or call the company’s Chinese customer service hotline at 400-883-8888 to obtain further information. The prescribed remedy begins with an inspection of the rear axle’s production-date code. If the assembly belongs to the identified defective batch, Chery will replace it without charging the owner. China’s State Administration for Market Regulation also directs owners to its official vehicle recall information channels for updates and defect reporting.
In Malaysia, affected Omoda 5 owners can check their vehicle identification numbers through the official Chery Malaysia website or contact the company’s customer careline at 03-9388 0888. Chery has said that authorized service centres will carry out inspections and required replacements at no cost. Because the reported defect concerns a safety-critical suspension component, owners should not assume that the absence of unusual noises or visible damage proves a vehicle is unaffected. Checking official recall eligibility and following the manufacturer’s inspection instructions provides a more reliable approach. Anyone concerned about the condition of a potentially affected vehicle should contact an authorized service centre for guidance before continuing to use it.
Chery’s Growing International Presence Makes the Recall a Bigger Test
The latest recall arrives at an important moment for Chery’s international reputation. On October 21, company chairman and president Yin Tongyue publicly acknowledged vehicle quality concerns in Malaysia during the World Intelligent Connected Vehicles Conference. According to reports of his remarks, he said he had personally apologized to Malaysia’s investment, trade and industry minister. Yin also emphasized the importance of respecting local regulations and establishing a sustainable presence in overseas markets. Those comments reflected the broader challenge facing Chinese automakers as they expand internationally: competitive products and ambitious sales targets must be supported by consistent manufacturing quality and dependable after-sales service.
For Chery, restoring confidence will depend on more than issuing apologies or publishing recall figures. The manufacturer must demonstrate that potentially defective vehicles are identified accurately, replacement components are available, and repairs effectively eliminate the hazard. Important questions remain unanswered, including how many of the 53,882 vehicles in China will ultimately require new axles and whether investigators will establish a direct manufacturing connection between the Chinese and Malaysian cases. The results of Malaysia’s regulatory investigation will also help determine how fully its safety concerns have been resolved. For consumers, the ultimate measure of success is straightforward: vehicles that are safe to operate, clear information from the manufacturer, and repairs completed before another preventable failure occurs.






























